Green Valley Kubota Ltd.

Information

2020 BaumaLight Fixed Tooth Mulcher for Mini Excavator MX1160R

The Baumalight MX1160R Brush Mulcher has a 60” rotor and is designed for excavators up to 33 tons. The MX1160R comes with unique performance boosting mulcher rings (licensed by Denis Cimaf). These rings improve the speed and efficiency of your mulching while reducing the risk of breakage on the tooth holders by limiting the size of the bites.

The MX1160R uses a fixed tooth holder and comes with 31 sharpenable planer teeth (P11000), as you will see in the brush cutting size charts this allow mulching of much larger material with an average carrier. The MX1160R comes with aggressive root rake ripper teeth build into the frame to rip out rocks and move logs. The unit also has a heavier duty body, built with a low-weight, high-strength AR400 steel.

Features may include:

The adjustable belt tensioner ensures the proper tension of your belts, with no extra idler wheel that could wear out. Simply loosen the bolts and raise the motor mount to tighten the belt.

If you are mulching and you catch some old fence wire, it can really cause damage to the unit if the wire slips over the edge of the rotor and gets wrapped around the shaft. The wire can get bunched against the bearings, causing major damage. Our wire protection kit contains a welded raised area on the end of the rotor that protects the shaft and prevents wire from getting in.

The rear of the unit is guarded by a 3/8” thick chain curtain so standing brush enters and mulched debris exits.

All MS960 Brush Mulchers come with a free set of 6 replacement teeth. These replacement teeth can be convenienty stored in the enclosed spare tool compartment.

Save time by easily replacing the AR400 steel wear plates on the MS960 without needing to remove the rotor.

Reduce your regular maintenance time by easily greasing the bearings on the MS960 from outside the frame. No tools required.

The relief valve protects the motor and the hydraulic system from pressure spikes. When an obstacle is hit the relief valves open and relieves the pressure.

A heavy duty reinforced belt delivers the force from the gear box to the rotor. This offers protection from the shocks inherent in mulching.

Our industry leading bent axis piston motors make the most use of your hydraulic flow and pressure for your brush clearing needs.