Green Valley Kubota Ltd.

Information

2020 Cotech Inc. Municipal Equipment GHS42-144

Snow pusher for municipalities. The GHS section up front is 44'' high and 144'' wide and the AC wing is 36'' high and 120'' wide.

The front mounted snow pusher is 44'' high and 144'' wide with an adjustable tension trip system that includes an 8 1/2'' high cutting edge.

The 30 degree hydraulic pivot includes a lateral float system to contour to the ground.

Both sides of the curved blade roll snow cleanly regardless of the angle or driving speed.

The three independent trip cutting edges make sure a minimal amount of snow is left over once the cutting edge is lifted.

The wing is 36'' high and 120'' wide, with an adjustable tension trip system that includes an 8 3/4'' high cutting edge.

Lifting lateral blade system and floting position that follow every street imperfection.

The floating lift system of the wing allows it to contour to the imperfections of the road.

The curve of both the front blade and side wing have been optimized relieve excess stress from the frame while maintaining ideal rollover and scraping of snow

With the innovative new system the GHS42-144 sub frame can be installed in less than 2 minutes with very little effort on the operators part. (see above video)

The front lift of the tractor is used for installation.

The hydraulic lock system, mechanically locks into place for added safety while driving.

The quick attach system of the sub frame allows of easy transition from our plow to a snowblower in less than 5 minutes.