2021 Kverneland 6250 R

2021 Kverneland 6250 R

The new Kverneland 6250 Plus fixed chamber balers are designed for maximum flexibility in all crop conditions. Perfectly shaped bales, combined with long-lasting reliable performance ensure that the new Kverneland 6250 Plus series will be a profitable investment.

The combined bale chamber concept, with the roller at front and chain and slat at the rear, is the ideal combination for dense and well-shaped bales in all conditions. The system ensures maximal bale rotation in all types of wet or dry crops.

• 2.0 and 2.2m pick-up with small diameter pick-up reel for fast and efficient throughput.

• Fork feeder, rotor intake or 14 knife cutting device.

• Drop Floor for easy unblocking.

• RotaMaX bale chamber concept with rollers and chain and slat.

• Easy and simple loading of net roll.

• New simple and intuitive control with the Focus 3 terminal

Features may include:

• The Kverneland 6250 offers a bale chamber designed with 6 rollers at the front and chain and slat at the rear part.

• The combined solution gives excellent crop handling in all conditions with consistent, high density bales in both wet and dry material.

• The chains and slat of the rear section give an early and 100% regular bale rotation and hence faster bale formation leading to denser core of the bale. Even in very dry crops.

• The heavy duty rollers of the front section ensure a well-shaped bale finish and very tight bales.

• The chains in the rear section results in less crop loss compared to a full-roller concept.

• The tail gate has a completely enclosed design to reduce crop loss to a minimum, especially when operating in silage.

• Parallelogram Drop Floor enables the operator to clear blockages easily from the tractor cab without any crop loss.

• Drop the floor to free the rotor of blockage, engage the PTO to feed the blockage through and close the floor to continue baling

• The SuperCut-25 pre-chopping system offers the ultimate solution for short chop baling with a chop length of 40mm. The short and precise chop provides dense and airtight bales for the best possible silage quality.

• The operator can choose to engage 25, 13, 12, 6 or 0 knives, giving maximum flexibility of operation.

• The SuperCut- 25 knives are fitted with dual action protection against foreign objects. Each knife is individually spring protected and can move in two directions.

• The SuperCut-14 knife chopping system provides a fast and efficient flow into the baler. With a chopping length of 70 mm it is the ideal solution for producing tight bales with superb silage quality.

• Each individual knife is spring protected against foreign obstacles. The knife will immediately return to working position once the obstacle has passed.

Truly impressive intake capacity can be achieved with the SuperFeed rotor intake system - handling all crop types with ease, whatever the conditions.

• The fork feeder versions are fitted with a cost efficient fork feeder intake system. This system provides direct feed into the bale chamber, and the wide opening allows almost unrestricted intake capacity for fast and efficient bale start.

• In addition the fork feeder gives less vibration and reduced power consumption.