Green Valley Kubota Ltd.

Information

2021 Kverneland 6350 R

The new Kverneland 6350 Plus full roller fixed chamber baler is designed for intensive professional use through long working days where high efficiency is required. The Kverneland 6350 Plus is developed to perform well in heavy silage conditions. A new bale chamber design with 17 ribbed rollers ensures consistently high-density bale formation in all conditions.

• 2.2m pick-up with small diameter pick-up reel with 5 rows of tines.

• PowerFeed rotor intake, 14 or 25 knife cutting device.

• Parallelogram Drop Floor for easy unblocking.

• Fixed chamber with 17 ribbed rollers for high-density bales.

• PowerBind Twine and Net wrapping Systems

• New simple and intuitive control with the Focus 3 terminal.

Features may include:

• The Kverneland 6350 is a specialist wet silage baler and the ideal solution for producing well-shaped and dense bales.

• The 17 heavy duty rollers with inner reinforcing discs are designed to work with the heaviest bales.

• The sturdy drive train of the compression rollers is conceived to withstand the most severe loads. Rollers are mounted on heavy-duty bearings.

• The small diameter rollers provide maximum density keeping horsepower requirement to a minimum.

• The bale pressure can be selected from the cab.

• The ribbed profile of the rollers and the use of 17 rollers ensure reliable bale rotation whatever the crop conditions.

• Parallelogram Drop Floor enables the operator to clear blockages easily from the tractor cab without any crop loss.

• Drop the floor to free the rotor of blockage, engage the PTO to feed the blockage through and close the floor to continue baling

• The SuperCut-25 pre-chopping system offers the ultimate solution for short chop baling with a chop length of 40mm. The short and precise chop provides dense and airtight bales for the best possible silage quality.

• The operator can choose to engage 25, 13, 12, 6 or 0 knives, giving maximum flexibility of operation.

• The SuperCut- 25 knives are fitted with dual action protection against foreign objects. Each knife is individually spring protected and can move in two directions.

• The SuperCut-14 knife chopping system provides a fast and efficient flow into the baler. With a chopping length of 70 mm it is the ideal solution for producing tight bales with superb silage quality.

• Each individual knife is spring protected against foreign obstacles. The knife will immediately return to working position once the obstacle has passed.

Truly impressive intake capacity can be achieved with the SuperFeed rotor intake system - handling all crop types with ease, whatever the conditions.

• The fork feeder versions are fitted with a cost efficient fork feeder intake system. This system provides direct feed into the bale chamber, and the wide opening allows almost unrestricted intake capacity for fast and efficient bale start.

• In addition the fork feeder gives less vibration and reduced power consumption.

• Dual fork feeder with double feed tines ensures even higher capacity, while still safeguarding fragile crop types.