2021 Kverneland RN 100

Information

2021 Kverneland RN 100

Cost efficient, easy to adjust and to maintain

The PN/RN models are robust semi-mounted reversible ploughs with a centre-mounted wheel and manual stepwise furrow width adjustment.

The up-graded models are delivered from June 2016 as follows:

Robust plough constructed around a robust 200x200 mm induction heat treated frame.

The advantages :

  • unique Kverneland steels and heat treatment technology to the complete plough for best durability
  • center mounted wheel for easy ploughing out to fences, hedges...
  • safe and smooth reversal of the plough ensured by turnover mechanism being linked to the wheel assembly
  • unique headstock for minimum turning circle. Cat. III or IV
  • gentle movement between the turnover arm and the frame via plastic wear plates. No lubrification needed. Less noise too
  • easy adjustment of the wheel angle when changing the ploughing width, via a turnbuckle
  • large clearance
  • unrivalled Kverneland Auto-reset system for non stop ploughing for PN. No maintenance. Shearbolt protections for RN
  • extendable by 1 furrow to the maximum number of furrows indicated in the chart below
In-Furrow & On-Land operations

Any PN/RN ploughs ordered from the 1st of June 2016 can work both In-Furrow and On-Land. Adjustments between In-Furrow and On-Land and vice-versa are hydraulic:

  • On-Land models can also plough In-Furrow
  • In-Furrow models can be retrofitted with an On-Land Kit

On-Land models suit tractors with up to 3,60 m outer wheel/track width.

Photos

Highlights

  • Green Valley, Ontario
  • 2021
  • Kverneland
  • RN 100
  • Available

Specifications

  • 2021
  • Kverneland
  • RN
  • 100
  • Plow
  • Interbody Clearance: 100 cm | Underbeam clearance: 70/80 cm
  • 35 - 40 - 45 cm
  • No of furrows: 5 - 9