2024 Land Pride WC15 Series WC1503

Information

2024 Land Pride WC15 Series WC1503

Land owners can utilize a Land Pride WC1503 Wood Chipper and their subcompact tractor to quickly turn mountains of limbs into chips for mulch or just to aid in decomposition. Driven by the tractor's PTO, this unit features a self-feeding 3" cutting capacity, two reversible and replaceable hardened-steel knives, adjustable discharge chute, and dual B-section drive belts. Adjustable support stands help elevate the Wood Chipper to match the height to your tractor's output shaft, enabling the driveline to remain straight and level. S/N 871375+ is compatible with QH05.

Features may include:

QUICK-HITCH COMPATIBLE

Our Quick-Hitch System allows you to quickly connect and disconnect from the implement - most without leaving the tractor seat. This is a real time saver when working on multiple projects.

SUPPORT STANDS

Adjustable support stands help you match up to a tractor easier and allows the unit to sit on the ground while keeping the driveline near level. Extends life of driveline u-joints.

270° DISCHARGE CHUTE

Adjustable rotating discharge chute directs where wood chips will be discharged. Chute rotate stops keep the chute from discharging chips toward the operator.

CUTTING KNIVES

1/4" Hardened steel cutting knives are reversible and replaceable. Each knife has two cutting edges - when one is worn, rotate 180° to a new cutting edge. Less downtime required to sharpen rotor knives. WC1503 - 2 knives / WC1504 - 4 Knives.

Photos

Highlights

  • Green Valley, Ontario
  • 2024
  • Land Pride
  • WC15 Series WC1503
  • Available
  • Feed Above Ground: 35" in (89 cm) Without adjustable skids

Specifications

  • 2024
  • Land Pride
  • WC15 Series
  • WC1503
  • General
  • 12 to 30 hp (9 to 22kw)
  • 25 hp for maximum capacity
  • Category: Cat. 2 with shear bolt
  • Power Take-Off: 540 rpm | Rotor: 1984 rpm
  • Cat.1 w/ Quick capabilities
  • Upper Hitch Plate Thickness: 1/4" in (6 mm) | Main Frame Thickness: 3/16" in (5 mm) | Rotor Housing Thickness: 3/16" in (5 mm) | Main Drive Pulley Diameter: 16.35" in (41.5 cm) | Rotor Pulley Diameter: 4.5" in (11.4 cm) | Chip Capacity: 3" in (7.6 cm) | Hopper Inlet Opening: 14" in x 15" in (35.6 cm x 38 cm) | Chipper Inlet Opening: 6" in x 3" in (15.2 cm x 17.6 cm) | Spout Discharge Opening: 3 1/4" in (8.3 cm) Square | Knife Size: 2.5" in x 2" in x 1/4" in (6.4 cm x 5.1 cm x 0.6 cm) | Chip Chute Position: 270 degrees
  • Size: 17.5" in (44.5 cm)
  • Feed Above Ground: 35" in (89 cm) Without adjustable skids
  • 378 lbs (172 kg)
  • Cutting Knife: Reversible and Replaceable
  • 2 single B section | Tensioner: Spring loaded with adjustment
  • Number of: 2
  • Knife: Hardened Steel (Specifically designed for chipping)
  • Self-feed
  • Feed Height Adjustment: 6 Settings